BHJ Products Home Page

Engine Blueprinting
Honing Plates
Engine Block Tooling
Cylinder Head Tooling
Valvetrain Tooling
Rotating Assembly Tooling
Chassis Tooling
Measuring Instruments
Lifter Bushings
Harmonic Dampers

Specials & Spotlights
Clearance Items
Instruction Sheets
Tech Information

Terms & Conditions   Contact Us

  Join BHJ on Facebook  BHJ on Instagram  Share or Print This Page 
BHJ accepts Visa MasterCard and American Express

Valvetrain Tooling

24" Laser Degree Wheel
Back to Previous Page

Part No: DGW-1 DGW, DGW1

The 24" Laser Degree Wheel provides the ultimate in ease of use, flexibility and accuracy. Super heavy-duty construction and precision design mean this is a "Hands-On" tool that makes the cam dial-in process faster and less complicated.

The large diameter, 1/4"-thick billet wheel provides .200" separation per degree mark and all marks wrap around the face and outside edge of the wheel for excellent clarity (below right).

The four curved spokes show general intake and exhaust open/close ranges for quick reference and allow easy crank rotation by hand, even with the complete valvetrain installed.

The easy-on, easy-off wheel allows cam and gear changes without resetting TDC, as the hub remains bolted to the crank when the wheel is removed. The wheel is indexed to the hub in 15º increments, using three locating dowels (below left) for nearly unlimited TDC and pointer positioning.

Click here for a customer's set-up photo on our Facebook page...

BHJ 24 Inch Laser Degree Wheel

BHJ 24 Inch Laser Degree Wheel Details
Wheel Indexable in
15º Increments
Easy-On, Easy-Off
Hand Nut Secures Wheel
Timing Marks Wrap Around
Outer Edge

The laser pointer and flexible mounting arm accept bolt sizes from 1/4" to 9/16", allowing virtually any mounting position or angle and ensuring correct readability from all view points — eliminating guesswork.

The heavy duty, billet steel hub assembly weighs over 4.5 pounds and has an integrated 1-1/4" hex. It accepts up to a 5/8" (16mm) crankshaft bolt and uses interchangeable steel crank adapters for simple and economical application changes. Adapters are available for all applications, include dual-keyways in most cases and custom sizes and keyway configurations are also available. A 4" O.D. knurled hand nut (above center) enables quick, secure installation and removal of the wheel.

BHJ Laser Degree Wheel Kit

The DGW-1 kit (shown right) includes the 24" wheel, laser pointer with flexible mounting arm and two-piece hub with one crank adapter (specify size when ordering). All steel parts have a durable, black oxide finish and aluminum parts are anodized.

Click here for a customer's set-up photo on our Facebook page...

Contact us for tech and pricing.

Back to Previous Page

  Terms & Conditions   Contact Us